FOXBC 14mm Indexable Carbide Inserts Replacement for Grizzly H7319 Inserts and Grizzly Spiral Cutterhead Jointer Planer 14 x 14 x 2mm - 10 Pack
- 14 x 14 x 2mm carbide insert compatible with Grizzly Spiral Cutterhead Jointer Planer(Check your owner's manual for correct inserts.)
- Replacement for Grizzly H7319 Indexable Carbide Inserts
- Indexable solid carbide inserts measures 14 x 14 x 2mm
- When replacing or rotating inserts, the seat should be as clean as possible. This will prevent breakage of inserts and ensure proper insert alignment. To properly align the insert, press the insert away from the seat while tightening to approximately 55 inch pounds torque. This allows the countersink in the tip and the taper of the head on the flathead screw to slide the tip into its proper position.
- Plastic Case Includes 10 knives.
- FOXBC Carbide Inserts keep your woodworking planer for Grizzly Spiral Cutterhead Jointer Planer cutting cleanly for the best results.
H7319 Replacement Indexable Carbide Inserts
Replace your nicked and worn-out inserts.
The H7319 14 x 14 x 2mm Replacement Carbide Inserts come in a ten pack and are great to have on hand.
Carbide inserts hold their edge much longer than high-speed steel knives and inserts.
They easily replace old inserts on your woodworking machinery.
Rotate them as they become dull or should they become nicked.
- Material: Carbide
- Size: 14 x 14 x 2mm
- G0452Z 6" Jointer manufactured 4/15 and after
- G0453PX 15" Planer manufactured 4/15 and after
- G0453Z 15" Planer manufactured 4/15 and after
- G0453ZW 15" Planer
- G0454Z 20" Planer manufactured 4/15 and after
- G0454ZW 20" Planer
- G0480 10" Jointer
- G0490X 8" Jointer manufactured 4/15 and after
- G0490XW 8" Jointer
- G0526 6" Jointer
- G0543 8" Jointer
- G0544 20" Planer
- G0546 20" Shop Fox Planer manufactured 8/04 and after
- G0593 8" Jointer manufactured 2/08 and before
- G0604ZX 6" Jointer manufactured 4/15 and after
- G0609X 12" Jointer manufactured 4/15 and after
- G0634 12" Planer/Jointer
- G0656PX 8" Jointer manufactured 4/15 and after
- G0656X 8" Jointer manufactured 4/15 and after
- G0656XW 8" Jointer
- G0706 12" Jointer manufactured 4/15 and after
- G1021X 15" Planer
- G1033X V1 20" Planer manufactured 6/07 and before
- G1033ZX 20" Planer
- G4815 20" Jointer
- G9740Z 20" Planer
- G9859Z 8" Z-Series Jointer
- G9860ZX 12" Z-Series Jointer
- G9953ZX 16" Z-Series Jointer
- G9953ZXF 16" Z-Series Jointer
- G9961 24" Planer
- G9967Z 20" Planer
- H7653 6" Spiral Cutterhead
- W1705 8" Jointer
- W1718 20" Planer manufactured 8/04 and after
- W1741S 8" Jointer manufactured 4/15 and after
- W1741SW 8" Jointer
- W1742S 15" Planer manufactured 4/15 and after
- W1742SW 15" Planer
- W1744S 12" Jointer manufactured 4/15 and after
- W1754S 20" Planer manufactured 4/15 and after
- W1754SW 20" Planer
- W1755S 6" Jointer manufactured 4/15 and after
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
CA PROP 65 WARNING
BE CAREFUL. Always wear eye and ear protection along with dust masks. Avoid using blades, bits while in loose clothing. Keep hands, body, clothing and hair away from the cutter. Do not remove safety guards, and be sure to always feed against the cutter rotation. Never use dull or damaged cutters. Disconnect power when changing blades or making adjustments, and always leave the power disconnected when not in use. Follow all safety recommendations of the power tool manufacturer. FOXBC Company assumes no responsibility for defects, damage, or injury (direct or indirect) caused by misuse, abuse, alteration or modification
of any product (including sharpening).
WARNING: Re-grinding of FOXBC products will produce dust of potentially hazardous ingredients. Always read and follow owner’s safety manual of all power machinery before using bits. Always use eye protection while using this or any carbide cutting product.
WARNING: FOXBC products can expose you to chemicals including lead and/or cobalt, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to http://www.P65Warnings.ca.gov.
WARNING: Drilling, sanding or machining wood products can expose you to wood dust, a ubstance known to the State of California to cause cancer. Avoid inhaling wood dust or use a mask or other safeguards for personal protection. For more information go to http://www.P65Warnings.ca.gov.
Our goal is to help woodworkers and artisans across the world to get their most affordable and top quality replacement parts.
Try It Risk-Free!
Backed by a 100% money back guarantee, you have nothing to lose!
Warranty - Promise
100% Satisfaction Guarantee! If for ANY reason you are not satisfied with this item, you may return it within 30 days for a full refund or replacement.
So why wait? Order Yours Today and Get Your Planer & Jointer or Band Saw on the Right Track!