Descripción
Cuchilla cepilladora de repuesto HSS para Delta 22-540 Delta TP300, reemplaza 22-547, juego de 2
Material de la hoja: Acero de alta velocidad-M2/SKH51/W6Mo5Cr4V
Doble filo
Las dimensiones de cada hoja son: 12-15/32" x 3/4" x 1/16"
. Cuchillas cepilladoras de repuesto para Delta 22-540 Delta TP300 reemplaza 22-547
. Hecho de acero de alta velocidad para una vida de corte más larga
. Los cuchillos reversibles tienen 2 filos
. Embalaje en caja de plástico
. un conjunto de 2
Las cuchillas son reversibles y se adaptan a las cepilladoras de mesa y portátiles.
FOXBC se enorgullece de ofrecer reemplazo para las hojas de cepilladora, las cuchillas de unión y la correa de cepilladora Delta para mantener su cepilladora de carpintería cortando limpiamente para obtener los mejores resultados.
Ofrecemos cuchillas cepilladoras y cuchillas ensambladoras de reemplazo de carburo y acero de alta velocidad (HSS) de alta calidad para todos los modelos de cepilladoras y ensambladoras Delta.
Payment & Shipping
CA PROP 65 ADVERTENCIA
Let customers speak for us
Too early for an accurate assessment of the blades. Last set was not from you and they obviously didn’t wear well. Hopeful that these continue to impress me with their ability to maintain an effective edge.
I didn’t buy this, just testing review authenticity!
Wasn't to sure if it would fit but it worked out good will probably get more for cutting wood working putting on table top
I purchased the cutter head for my dewalt planer. I can’t say enough good about this product. This turned my planer in to a completely different machine. If you’re on the fence about the cost I am here to say it is well worth the money. Turned an hour long job into a 10 minut job. I put it off for a long time and now I regret not doing it sooner.
Wasn’t good booklet but YouTube was great. Once installed was the awesome bit it’s absolutely amazing so quiet and a wonderful finish on the results. Well worth it.
I was hesitant spending this amount without knowing if the reviews were true to their word. Fortunately my machining background in cutting tools helped make the decision to go ahead. No regrets! This tool exceeded my expectation. It cuts much quieter, cuts much smoother, less load on the machine allows for a deeper cut. This is a worth while tool.
Items arrived from China within the stated time with frequent shipping updates. Smooth transaction from ordering to delivery with no hidden costs. Very competitively priced. Had to trim width to fit the 20mm pulley wheel which wasn’t a problem and to be expected. Fitted tyre after soaking in hot water, clamping and using wooden dowel to ease the tyre on with some stretching. Plenty of advice online. Fits perfectly and does the job! Seems of good quality but time will tell and urethane should last. Very pleased with the product so far.
STAY AWAY FROM THIS COMPANY.
Here is a bit of the 9 emails so far. They keep asking questions, etc. etc. and even asking for me to take and send pictures of the blades side by side. They sent the wrong product and are refusing to make it right.
"Annie
Jan 20, 2025, 9:59 AM (5 days ago)
to me
please not worry, what are you old blades photo and received blades photo.
so i can help you"
I repled then I get:
"sorry about this matter again, what are your brand and model?
also what are you purchased them elsewhere.
please let me know link, so i can check what are error, this is ok?
thanks again"
ARE THEY SERIOUS? Pictures and a link from where I got the correct product? Then they go silent
My reply:
"Part of the email.."Here is a picture of the 2 blades side by side. They are not cut right, and you can see the difference and the holes do not line up. We have tried multiple times to make them work and they do not. It has also been 4 days since your last communication and 9 since I have requested the return."
Very very satisfied with this purchase! Talk about a game changer! Noise difference is unbelievable! Not to mention how well it cuts! Installation was pretty simple and straight forward. Fit perfectly and works even better!
It worked great! It cut straight and clean on a piece of 1 1/4" heavy DOM. Went nice a smooth with no heating of the part. For the money, this is a good deal.
If you need an everyday construction site set of blades, look no further than these. I cut approximately 30 brace blocks from 2x4s for a deck. One blade did 60 cuts like the first cut. I even did a one vertical cut on a 2x8 at the end. All were done on pressure treated lumber, I’m impressed. Can’t beat the price and I will be ordering more. 6/12 tpi for those who want to know.
These work like any other blade that I have purchased. I have not necessarily found any great difference between the most expensive brands and the lower priced brands since I tend to challenge the blade with all types of materials. I would lump this in the mix and buy these based upon the price. At a dollar and a half, for each blade, these are on the very affordable side of what is available. I have sometimes used long metal blades for demolition if I have a large amount of metal embedded (could be conduit, etc.).
I don't often review but I have gone through many planer blade sets for this planer. I'm very glad there is an exact fit replacement as it seems Dewalt has stopped selling blade replacements. These seem to be an exact fit. All dimensions are exact except they are consistently .02 grams heavier and there's no pyramid stamp. I only did the weight because I could not find discrepancies (LxWxHxT). I read a review that they are not as good as the original, don't last as long. May be slightly softer material, IDK...TBD. I will get back to you on this.For now I am giving it 5 stars. I'm on my 9th double pack of blades from Dewalt. That's 4 blade sets per double pack. 36 blade changes. Excellent planer. Glad FoxBC picked up this replacement part.Price = matchesFit = matchesLife & cut = TBDHope this helps, Cheers!
FOXBC 9 Inch 6/12 TPI Demolition Reciprocating Saw Blades for Nail-Embedded Wood, Bi-Metal, 25-Pack with Case --- Received 25 blades as advertised. Haven’t had occasion to use one yet but they are thinner metal, but solid and sharp. Demolition blades are usually bulkier than these. Fit easily into my Dewalt battery operated reciprocating. saw. Plastic case is adequate for keeping them together but doesn’t look like it would take much abuse.
Partial review only, as I need to put these through their paces. The blades are well formed and have no obvious flaws. No curves, errors, etc. The case could use a bit more strength, though, as both pieces of mine are cracked.
What customers think about the store
Store offers quality woodworking tools and replacement parts at competitive prices. Customers appreciate sharp, well-packaged blades and helpful customer service. Shipping from overseas typically takes 1-3 weeks but is reliable with tracking. Products fit well...
AI-generated from customer reviews.
I was using it to trim off excess of melamine veneer edging. Very happy with results
Don’t wait change out your blades more often so you can get a great finish the first time. It saves your wood and time, Package of two blades That are double sided so you can reverse them it’s like getting four blades.
Purchased some Delta planer blades. Great buy and worked great!
The product came very protected and was very sharp on both edges of each blade. Works well installed.
Fit my machine as they should sharp out of the package
These blades are a direct replacement for my planer. My old blades had started to show there age and one had a small nick in the edge. Replacement was easy as the blades are an exact match to what was already installed. Be careful as these blades are sharp making it easy to cut yourself while installing them. So far the blades have held up to use well and plane boards easily making a nice finish.
These blades came razor sharp and fit my 22-540 perfectly.
These were a replacement for a delta planer. Fit perfectly and did the job.
These are a great valued blade set for a Delta TP300.
Installation was easy, just followed the instructions in the manual. Be very careful when handling as they are extremely sharp and double edged. This allows you to flip them over when the first side starts to dull. It's like 2 sets of blades in one!
Highly recommended.