Description
FOXBC 10-Inch Table Saw Blades, 80-Tooth, Fine Finish Blade with 5/8-Inch Arbor
- 10 Inch Fine Finish Miter / Table Saw Blade 80-Tooth with 5/8" Arbor, ATB
- table saw blades with high-quality thin kerf and plate for fast, durable, smooth cutting, less vibration and noise, and excellent finish
- Made from high-density tungsten carbide for toughness, wear-resistance, and long life
- Compatible with DeWalt, Skil, Metabo, Makita 10 Inch Miter Saws, Table Saws and other Saws
- Ideal for crosscutting oak, pine, melamine, plywood, and moulding.
- FOXBC10 Inch Saw Blades Professional Woodworking Saw Blade keep for Miter Saws and Table Saws cutting cleanly for the best results.
Payment & Shipping
CA PROP 65 WARNING
Let customers speak for us
Too early for an accurate assessment of the blades. Last set was not from you and they obviously didn’t wear well. Hopeful that these continue to impress me with their ability to maintain an effective edge.
I didn’t buy this, just testing review authenticity!
Wasn't to sure if it would fit but it worked out good will probably get more for cutting wood working putting on table top
I purchased the cutter head for my dewalt planer. I can’t say enough good about this product. This turned my planer in to a completely different machine. If you’re on the fence about the cost I am here to say it is well worth the money. Turned an hour long job into a 10 minut job. I put it off for a long time and now I regret not doing it sooner.
Wasn’t good booklet but YouTube was great. Once installed was the awesome bit it’s absolutely amazing so quiet and a wonderful finish on the results. Well worth it.
I was hesitant spending this amount without knowing if the reviews were true to their word. Fortunately my machining background in cutting tools helped make the decision to go ahead. No regrets! This tool exceeded my expectation. It cuts much quieter, cuts much smoother, less load on the machine allows for a deeper cut. This is a worth while tool.
Items arrived from China within the stated time with frequent shipping updates. Smooth transaction from ordering to delivery with no hidden costs. Very competitively priced. Had to trim width to fit the 20mm pulley wheel which wasn’t a problem and to be expected. Fitted tyre after soaking in hot water, clamping and using wooden dowel to ease the tyre on with some stretching. Plenty of advice online. Fits perfectly and does the job! Seems of good quality but time will tell and urethane should last. Very pleased with the product so far.
STAY AWAY FROM THIS COMPANY.
Here is a bit of the 9 emails so far. They keep asking questions, etc. etc. and even asking for me to take and send pictures of the blades side by side. They sent the wrong product and are refusing to make it right.
"Annie
Jan 20, 2025, 9:59 AM (5 days ago)
to me
please not worry, what are you old blades photo and received blades photo.
so i can help you"
I repled then I get:
"sorry about this matter again, what are your brand and model?
also what are you purchased them elsewhere.
please let me know link, so i can check what are error, this is ok?
thanks again"
ARE THEY SERIOUS? Pictures and a link from where I got the correct product? Then they go silent
My reply:
"Part of the email.."Here is a picture of the 2 blades side by side. They are not cut right, and you can see the difference and the holes do not line up. We have tried multiple times to make them work and they do not. It has also been 4 days since your last communication and 9 since I have requested the return."
Very very satisfied with this purchase! Talk about a game changer! Noise difference is unbelievable! Not to mention how well it cuts! Installation was pretty simple and straight forward. Fit perfectly and works even better!
It worked great! It cut straight and clean on a piece of 1 1/4" heavy DOM. Went nice a smooth with no heating of the part. For the money, this is a good deal.
If you need an everyday construction site set of blades, look no further than these. I cut approximately 30 brace blocks from 2x4s for a deck. One blade did 60 cuts like the first cut. I even did a one vertical cut on a 2x8 at the end. All were done on pressure treated lumber, I’m impressed. Can’t beat the price and I will be ordering more. 6/12 tpi for those who want to know.
These work like any other blade that I have purchased. I have not necessarily found any great difference between the most expensive brands and the lower priced brands since I tend to challenge the blade with all types of materials. I would lump this in the mix and buy these based upon the price. At a dollar and a half, for each blade, these are on the very affordable side of what is available. I have sometimes used long metal blades for demolition if I have a large amount of metal embedded (could be conduit, etc.).
I don't often review but I have gone through many planer blade sets for this planer. I'm very glad there is an exact fit replacement as it seems Dewalt has stopped selling blade replacements. These seem to be an exact fit. All dimensions are exact except they are consistently .02 grams heavier and there's no pyramid stamp. I only did the weight because I could not find discrepancies (LxWxHxT). I read a review that they are not as good as the original, don't last as long. May be slightly softer material, IDK...TBD. I will get back to you on this.For now I am giving it 5 stars. I'm on my 9th double pack of blades from Dewalt. That's 4 blade sets per double pack. 36 blade changes. Excellent planer. Glad FoxBC picked up this replacement part.Price = matchesFit = matchesLife & cut = TBDHope this helps, Cheers!
FOXBC 9 Inch 6/12 TPI Demolition Reciprocating Saw Blades for Nail-Embedded Wood, Bi-Metal, 25-Pack with Case --- Received 25 blades as advertised. Haven’t had occasion to use one yet but they are thinner metal, but solid and sharp. Demolition blades are usually bulkier than these. Fit easily into my Dewalt battery operated reciprocating. saw. Plastic case is adequate for keeping them together but doesn’t look like it would take much abuse.
Partial review only, as I need to put these through their paces. The blades are well formed and have no obvious flaws. No curves, errors, etc. The case could use a bit more strength, though, as both pieces of mine are cracked.
What customers think about the store
Store offers quality replacement blades and parts at competitive prices with international shipping. Customers praise product quality and fit, though delivery times from overseas can be lengthy (2-3 weeks). Excellent customer service and communication througho...
AI-generated from customer reviews.
This is regular crosscut / generalist blade for cabinetry and finish work. I have several FoxBC blades now and they're all excellent - well balanced, sharp and non-stick.
This is my second order with FOXBC. The quality is excellent, at a price that can't be beat. I am a very happy customer.
Well made blade., have been using brand for over a year. Use on an older commercial Craftsman table saw. When we start ripping 2 x 4 x 8' at 3/4" wide. Make anywhere from 50 to 75 continuous rips. The blade remains cool, true and sharp. Have made about 1,500 so far and blade is still sharp. Have a dedicated blade for ripping hard woods and that one has remained sharp, true and cool
Cutting wood, easily and very sharp with less noise.
I needed a fine toothed blade for cutting MDF. This one works great and for the price it can’t be beat. Not sure about long term durability since I’ve just started using it.
My husband fussed about the $ I spent on this blade. Then he watched me rip an oak board. No more fussing!
Great quality blade for a great price. Cuts clean, stays cool.
have this in my Delta table saw , works great, nice and sharp and is not flimsy like a Diablo blade , the price great for what you get , i cut Baltic Birch on my table saw , nice clean cuts , would definitely buy again .